EX-200 evacuated miniature crystal oscillator the EX-200 series ofers a ruggedized hybrid thick flm construction in a low profle hermetically sealed 16pin ddil package, which can withstand severe environmental conditions. this product utilizes vis emxo technology resulting in excellent stability performance and fast warm-up with low power consumption. vectron international ? 267 lowell road, unit 102, hudson, nh 03051 ? tel: 1-88-vectron-1 ? http://www.vectron.com ? ruggedized hybrid thick flm construction ? low power consumption ? previous model: ex-240 series ? frequency range: 10 mhz - 20 mhz ? severe environmental conditions features applications description EX-200 frequency stabilities 1 parameter min typ max units condition vs. operating temperature range (refer- enced to +25c) -20 -30 -50 +20 +30 +50 ppb ppb ppb -0 +70c -20 +70c -40 +85c performance specifcations 1 of 4
performance specifcations vectron international ? 267 lowell road, unit 102, hudson, nh 03051 ? tel: 1-88-vectron-1 ? http://www.vectron.com frequency stabilities 1 parameter min typ max units condition initial tolerance (for fxed frequency) vs. supply voltage change vs. load change vs. aging / day vs. aging / 1 year vs. aging / 10 year vs. aging / 10 year vs. aging / 10 year -1.0 -10 -10 -2.0 -200 -1000 -1500 -2000 +1.0 +10 +10 +2.0 +200 +1000 +1500 +2000 ppm ppb ppb ppb ppb ppb ppb ppb at time of shipment, nominal efc vs 5% load 5% after 7 days of operation 10 to <12mhz 12 to <16mhz 16 to 20mhz warm-up time 90 120 seconds seconds to 1ppm of fnal frequency @+25c to 100ppb of fnal frequency @+25c supply voltage (vs) supply voltage (standard) 4.75 5.0 5.25 vdc supply voltage (option) 3.135 3.3 3.465 vdc power consumption 2.5 0.7 watts watts during warm-up steady state @ +25c rf output signal [standard] hcmos load 15 pf signal level (vol) 0.1 vdc signal level (voh) 0.9 vdc rise/fall time +7 ns (10-90%) duty cycle 40 60 % (voh-vol)/2 signal [option] sinewave load 50 ohm output power (standard) 0 +1.5 +3.0 dbm 50 ohm load output power (option) +3.0 +4.5 +6.0 dbm 50 ohm load harmonics -25 dbc sub-harmonics -60 dbc frequency tuning (efc) tuning range fixed; no adjust tuning range sufcient to compensate for 10 years aging efc (0v to 4vdd) additional parameters phase noise @ 10 mhz -100 -130 -140 -145 -150 dbc/hz dbc/hz dbc/hz dbc/hz dbc/hz 10 hz 100 hz 1 khz 10 khz 100 khz g-sensitivity 1 ppb/g test at 10g sine vibration at 100hz allan deviation 0.2 ppb tau = 1 sec environmental conditions (designed to meet) ? mechanical shock (survive) mil-std-202, test method 213, condition e (100g, 0.5msec) ? vibration random (survive) mil-std-202, test method 214, condition i-h (20grms, 3 minutes/axis) ? vibration sine (survive) mil-std-202, test method 204, condition d (20grms, 20 minutes/axis) ? thermal shock (survive) mil-std-202, test method 107, condition a-2 (50 cycles, -55c to +85 c) 2 of 4
vectron international ? 267 lowell road, unit 102, hudson, nh 03051 ? tel: 1-88-vectron-1 ? http://www.vectron.com pin connections 1 efc \ no connect 2 - 4 no connect 8 ground (case) 9 rf output 13 - 15 no connect 16 supply voltage input dimensions in inches type a code height h pin length l 0 0.35 0.17 outline drawing / enclosure recommended refow profle 3 of 4
4 of 4 ordering information ex - 200 0 - d a j - 508 0 - 10m0000000 0 j ed ed jed0 jede jede mdjdm5j0 mdjdm5je mdjdm5je djm-xmmeje5m50xxxdd disclaimer vectron international reserves the right to make changes to the product(s) and or information contained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. rev: 10-23-2014 jv or dditional information lease ontact usa: ero eraioa eu e europe: ero eraioa eus ss asia: ero eraioa :ees uo saai ia uue sus u u u oes: uuussseuuseeuseuuuueesu reueies usuueseussuessuueusus usueusus ase oise eraes i ireasi oupu reue uuueu oa aor or aaiaii
|
